Home > Remote Access > Remote Access To Wireless Network Behind Dsl Modem?

Remote Access To Wireless Network Behind Dsl Modem?

In normal mode, there is no video until late afternoon when the angle of the sun is low. cause the modem is in the living room, from where my other two room mates connects their computer using wifi and Ethernet.I had to keep the Linksys router in my room Reply 37 howie September 9, 2011 at 11:18 pm Wish i found your blog earlier 😦 . If it is important to try, please tell how and where to make the IP address change for the router with no risk involved.. navigate here

Thought I would ask for help. I've done this for many years, but when handed a new router, I can spend hours trying to make it work too. When your DSL modem connects to the internet it will be given a public address and therefore a "presence" on the web. Is there a way to installing such a connection (fixed ?) without having the cam' IP address properly detected ?

You create an account, pick a domain name from what is free (you can have your own domain name, but not for free), then pick a hostname which is the part Great article and great discussion thread. If I try and map a network drive from the client using the same information, I get the same results. You should be able to test this via any normal computer on the Internet.

Next step, set-up remote access. 60 jeff February 13, 2012 at 8:39 pm agree with Henri and also if you can view via your cable (cat 5) but cannot via wireless; Since I'm typically using my smartphone to check up on things and only have a single port to access per camera, SSH was the way to go in this case. By the way, I have the foscan ip cam, I can only access from LAN http://192.168.1.107.8010, but not WAN would you be able to tell me what is wrong? Read over many postings here and on other sites.

If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. And use HTTPS access.If you like it, you can then search for and buy more robust models, but realize that remote access is not exactly hazard-free. The router is Mod.WRT54G the cameras are Mod.IPCAM01 Hope someone can help Roy Reply 5 ipcamnetwork November 9, 2010 at 2:19 am Be careful using low number ports, they have all DD-WRT ROUTER DD-WRT ROUTER MODEM ROUTER · actions · 2012-Oct-5 6:48 am · broccolijoin:2007-11-29Portland, OR broccoli Member 2012-Oct-5 11:18 am Re: Accessing DD-WRT Webgui behind a ADSL Modem RouterIs there any

Example: -- 1=C:\MyIpCamData\ -- The DevFind.exe, enclosed in some Zip's, will not find all different "series" IP-Cams in your Network, so, it's possibly of no real use. To be on the internet you need to have a "public" address, much like a postal address but as you are probably aware is made up of 4 numbers (e.g. 165.213.1.234). There is a free VPN-ish program called Hamachi http://www.hamachi.cc and as VPN you can use it to connect directly to users in your "network". To do this, you will have to go into the configuration screen for your camera and set the option to have a fixed IP address and not use DHCP.

You will receive a WARNING, if you start the progs, Please accept UNSIGNED Active-X Installation, or your Progs will not work. 2. have a peek at these guys Just go to www.whatismyip.com and it will give you your external IP address. All rights reserved. IP Passthrough means the AT&T supported CPE device terminates the DSL, authenticates with the network (Receives a WAN IP) and shares that IP address with a single device connected to the

I personally perfer using VPN due to the transparency it offers. check over here Affiliate Programs Terms Of Use Privacy Policy Advertising Choices Broadband Information © AT&T Intellectual Property. On Netgear, it’s called Start port and End Port. Detalhe meu roteador é um AP Router WR 254 que esta funcinando como gateway, minha camera é uma foscam.

I agree that bridging the modem/router or configuring the second router as a switch and wireless access point is better; was just trying to answer the question. I would imagine that any methodology, even ssh or tunneling is still vulnerable to a brute force password attack. The second way is using SSH tunnelling. http://wowtechminute.com/remote-access/remote-pc-access.html internet) , i can access my cam on PC (i.e.

Sure, the encryption makes it hard to intercept the data as it moves from your network to your remote PC, but the reality is, the hackers don't want to intercept the For Windows Firewall, navigate to Control Panel > System and Security > Windows Firewall > click "Allow a program through Windows Firewall" > locate "Remote Desktop" and tick to allow it Reply 22 Dan February 25, 2011 at 6:21 pm I thought I had this working, but I cannot access remotely.

This screen's appearance will vary depending on your type of connection to the Internet.

Enjoy! Reply 63 Mark February 17, 2012 at 6:32 am Thank you with your help and more time I was able to get both cams to work. deliobs · Jan 19, 2011 at 02:30 PM 0 Share My modem/router is the same as the initial post D-Link DSl-500B and my wireless router is TP-Link TL-WR541G Answer by Cry A router flashed with DD-WRT firmware offers many DDNS service provider choices (some of them free).

See for example; Maybe a good idea to update your otherwise excellent post? tiem275 says: 7 years ago Thanks for the clear instructions! For example, if you have 3 cameras, you can use 10001, 10002 and 10003. weblink My cameras are about 5 & 10 metres away from my router.

Are you looking for the solution to your computer problem? Check to see if it supports DDNS and most do. Configuring Motorola NVG510 Gateway In Passthrough The IP Passthrough feature allows a single PC on the LAN to have the Router's public address assigned to it. I've read through the posts above but all seem to be able to assign multiple ports for port forwarding.

by PudgyOne / August 9, 2008 5:26 AM PDT In reply to: Looks like I have a special password that's NOT in the dictionary and it would take quite a while Thanks again for your help !